> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.xsplit.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Adding XSplit Broadcaster's Audio in Zoom

## Checking your Audio Input on XSplit Broadcaster

It is important to know that Broadcaster will play the audio through your _System Sound_ and your _Microphone_. You will need to check if you have chosen the right devices in your settings.

Go to **Tools > Settings** to check your devices on the _Audio_ tab.

![Tools > Settings > Audio tab showing the different audio settings for XBC](https://cdn4.xsplit.com/helpdesk/images/i/o/405426099/5baa94bb349e0b3a9a898828/XBC-Virtual-Audio-Zoom-1.png)

---

## Setting XSplit Broadcaster as your Virtual Microphone

In **Zoom,** select **XSplit Audio (Broadcaster)** as your microphone input. This is so that your colleagues or viewers can hear any audio you play in your Broadcaster.

![Selecting XSplit Audio as the microphone in Zoom's Audio settings](https://cdn4.xsplit.com/helpdesk/images/i/o/405426157/52ca3e518b93fa52ba4b8cae/XBC-Virtual-Audio-Zoom-2.png)

| While you may select **XSplit Audio** as a microphone device in Broadcaster, it is not recommended as if you use the same audio output in Zoom, you will hear some audio loop.