> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.xsplit.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Adding Guests with NDI Remote

NDI Remote lets you capture a guest’s camera, microphone, screen, or even mobile device in XSplit Broadcaster as an NDI® source. The feed arrives with embedded audio and frame‑accurate sync, so you can build split‑screen, picture‑in‑picture, or full‑screen layouts exactly the way you would with any local camera source. 

|| NDI Remote is currently offline and the service is currently being reviewed . For remote guests, follow this guide to use [VDO.Ninja](https://support.xsplit.com/en/article/adding-guests-with-vdoninja-h0h037/).
---

## Setting Up an NDI Remote Connection

1. **Launch NDI Remote** then **invite and add guests**.
   [Follow NDI Tools documentation here](https://docs.ndi.video/all/using-ndi/ndi-tools/ndi-tools-for-windows/remote).
   ![Tip: Disable Show QR Code on Video when streaming publicly.](https://storage.crisp.chat/users/helpdesk/website/-/5/6/7/5/567507547fcdcc00/ndi-remote-1_120d76d.png)
2. In Broadcaster, click **Add Source → Video/Network stream → NewTek NDI** then select NDI Remote guests from the list.
   ![Sources will appear as **“Remote Connection”** by default, or under any custom name you set in NDI Remote.](https://storage.crisp.chat/users/helpdesk/website/-/5/6/7/5/567507547fcdcc00/ndi-remote-2_13jflxh.png)
| **Tip:** Plan for roughly **8–10 Mb/s** of network bandwidth on your production PC for each 1080p 30 fps guest.
---

## Next Steps

* **Design Your Layout** – Use the **Layout Wizard** or manual transforms for split‑screen, picture‑in‑picture, or lower‑thirds.
* **Mix Audio** – Balance each guest in **Audio Mixer** or route them to separate buses.
* **Record ISO Tracks** – Enable multitrack recording so every guest saves to its own file.
* **Go Live / Multistream** – Broadcaster treats NDI Remote feeds like any other camera source.
---